Phoenix M Series

The spring configuration of the Phoenix M1 is similar to the BP333.  Note the handle return spring runs from the center of the machine to the front, and the crank spring runs from the center to the rear.  This places less strain on the bearings on the machine.

Handle Return Spring Crank Spring Wood Roller for Metal Shaft

M4-4 Crank Spring (From post to wood roller to rear of machine)
M4-7 Wood Roller
M4-8 Handle Return Spring  (From cam eye around wood roller to front of machine)

To return to the parts list click here.

Find the brochure for the M1 here.