Universal Marking

Fountain Roller - Refillable

Press Button Fountain Rollers are recommended for high volume stenciling applications. These stencil roller units have an ink reservoir in the handle which feeds ink to the roller when the valve button is pressed. A felt wick in the roller head wipes ink completely across the face of the foam roll which results in nearly instantaneous response when more ink is needed. A threaded filling cap on the end of the handle is removed for filling. Recommended for use with Type P ink for porous surfaces. Can also be used with Type D Ink for non-porous surface stenciling.

The PBFR-31 roller applicators are manufactured from precision machined aluminum components and utilizes o-ring seals for leak proof operation. The entire unit can be completely disassembled if cleaning or repair becomes necessary. 

Model Description Item Number
PBFR-31 Press Button Fountain Roller  (Fluid Capacity: 4.225 oz.) 108M-PBFR31
PBFR-32 Replacement Roller 108C-PBFR32
PBFR-33 Replacement Felt Wick 108P-PBFR33

Universal PBFR-32 Replacement Rollers are made from the highest quality, firm density neoprene foam which is bonded to solid birch wood cores using solvent resistant epoxy. Our rollers are then precision ground between centers, for perfect concentricity. After prolonged use, a worn roller can be replaced in a matter of seconds to restore the unit to its original operating performance. For best results, it is generally recommended that the PBFR-33 Felt Wick be replaced when new rollers are installed.